Rule Amendments for Technical Rules

Issued on 30 May 2013

Name
Download
Guidance for the Classification and Registry of Ships
Notice No.27
Rules for Approval of Manufacturers and Service Suppliers
Rule No.37
Rules/Guidance for the Survey and Construction of Steel Ships Part B
Rule No.38 / Notice No.28
Rules/Guidance for the Survey and Construction of Steel Ships Part C
Rule No.38 / Notice No.28
Rules for the Survey and Construction of Steel Ships Part CSR-B
Rule No.38
Rules/Guidance for the Survey and Construction of Steel Ships Part CS
Rule No.38 / Notice No.28
Guidance for the Survey and Construction of Steel Ships Part D
Notice No.28
Rules/Guidance for the Survey and Construction of Steel Ships Part H
Rule No.38 / Notice No.28
Rules/Guidance for the Survey and Construction of Steel Ships Part K
Rule No.38 / Notice No.28
Rules/Guidance for the Survey and Construction of Steel Ships Part L
Rule No.38 / Notice No.28
Rules/Guidance for the Survey and Construction of Steel Ships Part P
Rule No.38 / Notice No.28
Rules for the Survey and Construction of Steel Ships Part Q
Rule No.38
Rules/Guidance for the Survey and Construction of Steel Ships Part R
Rule No.38 / Notice No.28
Rules/Guidance for Marine Pollution Prevention Systems
Rule No.39 / Notice No.29
Guidance for Safety Equipment
Notice No.30
Guidance for High Speed Craft
Notice No.31
Rules/Guidance for the Survey and Construction of Passenger Ships
Rule No.40 / Notice No.32
Guidance for the Approval and Type Approval of Materials and Equipment for Marine Use
Notice No.33

Summary of Amendments to the Rules and Guidance

Name
Approval of Firms Carrying Out In-Water Survey of Ships
Maintenance, Testing and Inspection of Fire Protection Systems and Appliances
Changes to Classification Survey, etc. Application Forms
Application of NOx Emission Requirements when Replacing Diesel Engines
IACS CSR for Bulk Carriers, July 2012 Corrigenda 1 and 2
Supporting Structures of Independent Prismatic Tanks
Incorporation of Material Factors for High Tensile Steel into the Formulae for Calculating the Scantlings of Frames below Freeboard Deck forward of Collision Bulkhead
Stability Computer for Passenger Ships
Pontoon Barges
Submission of Plans and Documents for Classification Surveys During Construction
Scope of Application of Fire-resistant Cables
Ambient Conditions for Electrical Installations
Ventilators installed in Tanker Cargo Pump Rooms
Fixed Water-based Fire-fighting Systems for Vehicle Spaces and Ro-Ro Spaces
Load Bearing Structures of High Speed Craft on Fire
Discharge Locations of Enriched Gas Generated from Nitrogen Generators
Secondary Means of Venting Arrangements for Tankers
Installation of Fixed Fire Detection and Fire Alarm Systems
Specification of Fixed Foam Fire-extinguishing Systems and Automatic Sprinklers
Grace Period for Compliance with the 2010 FTP Code
Interpretation of “Safe Return to Port” for Passenger Ships
Fire-extinguishing Systems for Deep-fat Cooking Equipment
Devices in Pantries
Helicopter Facility Foam Fire-fighting Appliances
Fuel Pump Arrangements when Operating in Emission Control Areas (ECA)
Interpretations Concerning Lifeboat Exterior Colours
Screened Angle of the All-round Lights
Omission of Approval Tests for Manufacturing Processes
Approval of the Manufacturing Process of Offshore Mooring Chains
Chemical Composition of Propeller Castings
Ultrasonic Tests of Steel Forgings
Test Certificates for Anchors and Chains
The word “omitted” when used in the context of the rule amendments described in the Amendments means that the requirement in question was not amended and is still applicable as before; it does not mean that the requirement is no longer applicable or was deleted.