Rule Amendments for Technical Rules

Issued on 1 June 2017

Name
Download
Rules/Guidance for the Inspection and Registration of Maritime Labour Systems
Rule No.28 / Notice No.26
Rules for the Survey and Construction of Steel Ships Part A
Rule No.29
Rules/Guidance for the Survey and Construction of Steel Ships Part B
Rule No.29 / Notice No.27
Rules/Guidance for the Survey and Construction of Steel Ships Part C
Rule No.29 / Notice No.27
Rules for the Survey and Construction of Steel Ships Part CSR-B&T
Rule No.29
Guidance for the Survey and Construction of Steel Ships Part CS
Notice No.27
Rules/Guidance for the Survey and Construction of Steel Ships Part D
Rule No.29 / Notice No.27
Guidance for the Survey and Construction of Steel Ships Part GF
Notice No.27
Rules/Guidance for the Survey and Construction of Steel Ships Part H
Rule No.29 / Notice No.27
Rules/Guidance for the Survey and Construction of Steel Ships Part K
Rule No.29 / Notice No.27
Rules/Guidance for the Survey and Construction of Steel Ships Part L
Rule No.29 / Notice No.27
Rules/Guidance for the Survey and Construction of Steel Ships Part M
Rule No.29 / Notice No.27
Rules/Guidance for the Survey and Construction of Steel Ships Part N
Rule No.29 / Notice No.27
Rules/Guidance for the Survey and Construction of Steel Ships Part S
Rule No.29 / Notice No.27
Rules/Guidance for the Survey and Construction of Steel Ships Part I
Rule No.29 / Notice No.27
Rules for the Survey and Construction of Steel Ships Part P
Rule No.29
Rules for the Survey and Construction of Steel Ships Part PS
Rule No.29
Rules/Guidance for the Survey and Construction of Steel Ships Part R
Rule No.29 / Notice No.27
Rules/Guidance for Marine Pollution Prevention Systems
Rule No.30 / Notice No.28
Guidance for Safety Equipment
Notice No.29
Rules for Cargo Handling Appliances
Rule No.31
Rules for Automatic and Remote Control Systems
Rule No.32
Rules/Guidance for High Speed Craft
Rule No.33 / Notice No.30
Rules/Guidance for the Survey and Construction of Passenger Ships
Rule No.34 / Notice No.31
Rules/Guidance for the Survey and Construction of Inland Waterway Ships
Rule No.35 / Notice No.32
Guidance for the Approval and Type Approval of Materials and Equipment for Marine Use
Notice No.33

Summary of Amendments to the Rules and Guidance

Name
Alternative Inspections for Internal Examinations of Boilers
Machinery Verification Runs in Special Surveys
Annual Testing of Navigating Equipment
Dispensation of Inclining Tests
In-water Surveys as Alternatives to Docking Surveys
Compartments Subject to Internal Examinations
Omission of Gas Trials
Strength Assessments for Parts of Type C Independent Tanks Coming into Contact with Structural Supports
Design Pressures of Products not Covered by the IGC Code
Torsional Strength of Container Carriers
Buckling Strength Assessment for Bilge Parts in the Torsional Strength of Container Carriers
Buckling Strength with respect to Longitudinal Bending of Hull Girder
Application of the Urgent Rule Change to the Common Structural Rules for Bulk Carriers and Oil Tankers
Vacuum Insulated Tanks
Distances between Solid Ballast and Cargo Tanks
Hull Structures of Polar Class Ships
Inert Gas Pressure Used in Cargo Oil Tank Oil Outflow Calculations
Standards for the Chemical Composition of Rolled Steel Plates for Pressure Vessels
Offshore Mooring Chains and Accessories for Offshore Mooring Chains
High Strength Rolled Steel for Offshore Structures
Welders and Welder Qualification Tests
Details of Fire Protection Materials
Definition of a Vehicle Carrier
Time of Power Supply to the Fixed Fire Detection and Fire Alarm System
Pilot Transfer Arrangement with an Adverse List
Closing Devices for Air Intakes in a Ship Carrying Liquefied Gases in Bulk
Corrigenda and Unified Interpretations for the IGC Code
Location of Fuel Tanks in Cargo Areas
Maritime Labour Convention
Marking of Safe Working Loads
Recording of Engine Status, etc. in Nitrogen Oxide Emission Control Areas
Energy Efficiency of Ships
Application of NOx Technical Code to Diesel Engines Fitted with NOx-reducing Devices
Unified Interpretations of the IGF Code
Use of Materials other than Steel on Engine
Specifications for Diesel Engines etc.
Application of SOLAS Requirements for Special Propulsion Systems
Computer Based Systems
Standards to Cables Used for Special Purposes
Harmonic Filters
Electrical Installations of Electric Propulsion Ships
Measures for Steering Control System Failures
The word “omitted” when used in the context of the rule amendments described in the Amendments means that the requirement in question was not amended and is still applicable as before; it does not mean that the requirement is no longer applicable or was deleted.